bent
Posts : 1
Join date : 2009-04-12
 |  Subject: cam Sun Apr 12, 2009 2:06 am | |
| Hi everyone. I have a Pedulla Interceptor with a 2400. The cam is wore out and I need to replace it. I was wondering if I pick up a 2410 if the cam from it would work? Also, how about some of the other pieces? I could just buy one from Kahler but if I can get one cheap enough on ebay I figured it might be nice to have for spare parts.
Thanks! | |
|
EricHaven
Admin
Posts : 2974
Join date : 2009-03-20
Age : 58
Location : Birch Bay, WA
| | Subject: Re: cam Sun Apr 12, 2009 1:40 pm | |
| Greetings, Bent! Welcome to the board!  The cams on both the 2400 and the 2410 should be completely interchangeable. The only difference between the two is the placement of the rollers, since the 2400 has them facing forward, and the 2410 has them facing rearward. So I believe that you could swap most of the parts between the two versions.  Guys? Am I overlooking something? | |
|
Chowderboots
Posts : 2197
Join date : 2009-03-22
Age : 32
Location : Kirkistan, WA
| | Subject: Re: cam Wed Apr 22, 2009 1:27 pm | |
| As far as I know, the only thing that differs between the 2410 and the 2400 is the base plate...might work!
Welcome, man! | |
|
