HomeCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 7410 converted to a 2400

View previous topic View next topic Go down 
AuthorMessage
Basszupfer

avatar

Posts : 34
Join date : 2013-01-01
Age : 42
Location : Saarbrücken / Germany

PostSubject: 7410 converted to a 2400   Thu Jan 17, 2013 8:09 am

...is it feasible generally?

according to my rickenfaker thread, that i surely wanna have a 2400 on there installed (mostly because of visual aspect, i don´t want to move the whole bridgehousing to the top)...
if i´d purchase an extra 2400 forward roller frame (99$ at wammiworld) and would take and use the existing innards (cam and the rollers with the shaft, then in flip-mode) on the off the 7410....
what would you say?

chances to get a ready 2400 (locked, stocked and barreled) tend more to less>0 in my case here.
Back to top Go down
View user profile
madmike

avatar

Posts : 1746
Join date : 2009-03-23
Age : 47
Location : phoenixville, pa. u.s. of a

PostSubject: Re: 7410 converted to a 2400   Thu Jan 17, 2013 7:15 pm

Yes, all the parts are compatible. Everywhere that sells the parts has the same part numbers for the parts that go to xx00 and xx10 models. The difference is the base plate.
Back to top Go down
View user profile
 
7410 converted to a 2400
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Preparation for #SCANDALJKT

Permissions in this forum:You cannot reply to topics in this forum
Bass Tremolo Fanatics :: Bass Tremolo Family :: Kahler-
Jump to: